Light Up The Night: Handgun Solutions in Low Light – Low light 101, including gear selection.

  • Sumo

By  on 

In the article Training Solutions in Low Light Environments, I addressed equipping and using a rifle in low-light environments. However, the vast majority of us will probably be armed with a handgun in situations where we need to defend ourselves. This article will address some of the things I have learned over the last several years training and teaching people how to shoot in low-light situations.

Before I get into techniques and equipment, I want to address the ingredient that ties everything together: training. If you have taken a class from me, or read one of my articles, you know I am adamant about training yourself to success versus allowing yourself to fail. This means that you need to train in low light in order to understand and overcome all the challenges that the situation causes.

For some of you, this might be difficult at best, since many local ranges do not allow shooting after dark. However, understand that you can modify your training and actually train in your own home or someplace similar, with a safe non-shooting gun such as a SIRT training gun or Red Gun. You will learn a lot simply by getting a safe training gun, turning the lights off and working through a simulated area — searching for, identifying, and engaging mock targets as you go.

This article will be broken down into simple, usable bits of information that I have found to be relevant in the many low-light scenarios and classes I have experienced. My goals are to:

– Help you select a good light, or assess if the one you have will do the job.
– Show the pros and cons of weapon-mounted lights.
– Present a handheld lighting technique that is simple to use and applicable in the close-range attacks you might encounter.
– Examine whether or not night sights are critical in a low-light environment.

Light Selection

Defending yourself in the dark is difficult, but it’s obviously much more difficult if you don’t have a light. First and foremost, commit to carrying a light everywhere you go. The lights made by reputable manufacturers today are small, lightweight, and very easy to carry. I admit that I like simple things, and therefore my first rule of light selection is to choose a light that works well but does not offer a lot of unnecessary functions. Lights that strobe or do SOS signals as well as different intensity functions are sometimes worth having. But I strongly recommend against buying a light that is so complex you have a hard time figuring out how to use those features, or worse, trouble using the primary feature (bright illumination) when you need it. I have seen more than one student have a strobe or low-intensity “AD” in class and frantically press buttons and turn bezels to fix the problem while the rest of the line was engaging a target.

  • Get a light with a thumb button activated switch, preferably one with a momentary feature and a permanent reverse click feature so you can click the light on, or just illuminate it for a second.
  • Make sure the light offers 120 or more lumens. Anything less will have less of an effect on the threat when you place the light in their eyes. Most lights these days have well above that amount.
  • Choose a waterproof light so you can use it when you need to and it doesn’t fail in the rain. I have washed my Nitecore light three times, and it has survived and continued to work well.
  • A toothed or serrated bezel is nice to have on a light, but be cautious when traveling. I have had one light taken away because the TSA agent said it was a “striking tool.” Some manufacturers advertise a toothed bezel as a tool that can be used to break out a vehicle windshield. I will say (from experience) that this is easier said than done.
  • Lastly, try to select a light small enough that you can carry it in your pocket with the bezel down (in the pocket), which means the clip will probably be mounted on the switch end. My personal favorite light is the Nitecore Extreme, which runs on CR123 batteries and has an output of 220 lumens. This is an awesome flashlight, and I have carried and used it for several years.

Pros and Cons of Weapon-Mounted Lights

These days, almost everyone has at least one weapon-mounted light, and they are a great solution for shooting in low-light environments. But although a weapon-mounted light offers advantages when shooting, it has some limitations during searches. The main problem that a weapon-mounted light presents is that the user must point the weapon at anything they want to directly illuminate. While it is possible to “wash” the light (bounce it off an object) off the ground and see most of what is in a room, in order to clearly see what is in someone’s hands, it might be necessary to shine the light’s beam directly at the person.

This means that the barrel of the gun is also pointed at the person. Following good safety principles and ensuring that the finger is off the trigger, and even outside the trigger guard, will help overcome this situation, but you the user must accept the risk that you are pointing your muzzle at a potential non-threat. The only way to really see what someone has in their hands (to make your decision to shoot or not) is to fully illuminate them with the beam.

Also an issue with a weapon-mounted light is the fact that carrying the light has to be done with a holster that is made for that gun/light combination. While duty holsters such as those made by Safariland are common, it is hard to find a concealment holster that accommodates a weapon-mounted light. Crimson Trace is making a new light called the Lightguard that is very small and I predict will be widely used for those carrying in a concealable non-duty-type holster.

Another huge consideration that a light like the Lightguard offers is that it is easily operable with one hand (and either one) if you are in a situation where this is necessary. The Lightguard has a pressure-activated switch located right below the trigger guard and activated by pressure from the middle finger as you increase your grip pressure. If you select a light made by other manufacturers, ensure that they offer a pressure-activation switch that can be mounted on the handgun grip.

Handheld Lighting Techniques

Knowing and training to use a handheld light is important for everyone, even those who have a weapon-mounted light, due to the fact that lights fail sometimes and your backup light will probably be a handheld. As a firm believer in simplicity, I recommend you use a flashlight technique that is simple and effective in most circumstances. The method I teach was not invented by me, but modified from an existing platform that I used to teach in the Federal Air Marshal service. The obvious downside is that you will be shooting with one hand, so if your one-handed shooting is subpar, you’ll need to spend time on it. You can practice one-handed drills with a flashlight in your hand even during daylight to get familiar with the technique.

I am familiar with the various two-handed flashlight techniques, and while I think each has its merits, I believe each also has some downsides. The Rogers technique is the only two-handed technique I know of that offers decent recoil control, and it is a modification of the normal shooting grip with the flashlight trapped between the first and second or second and third fingers (depending on who teaches you). The palm of the hand activates the flashlight as the shooter increases the grip pressure on the gun and button on the end cap.

Other than that two-handed technique, pretty much all other two-handed methods offer almost no recoil control over shooting with one hand. They do offer some stability over one hand, but as soon as the first shot is fired, that stability disappears. The biggest problem I have with two-handed techniques, especially when searching for a potential threat, is that they offer almost no ability to protect your head from a strike.

Another possible issue with some two-handed techniques is that they could easily cause the user to flag their hand with their muzzle if they had to break the technique apart and get one hand up to protect their head while simultaneously pulling their gun to a retention position.

To summarize: Two-handed techniques may be applicable if the user practices them regularly, but I don’t teach or recommend them, since they offer relatively no recoil control over one-handed shooting, make it much harder to defend your head, and are complex and slower to use when a situation occurs where one has to shoot.

What technique do I recommend? The one-handed eye index technique, which is a modification of the “neck index” that I have seen over the years where the user indexes the flashlight along their neck/jawline area. My eye index solution came from a nighttime training session when I was experimenting on a technique for use in some low-light stages for a match. I debated over using a two-handed technique (the Rogers) or a one-handed technique.

The downside of using a two-handed technique in this particular situation was that, while practicing my two-handed shooting, I kept activating the magazine release on my gun with the flashlight. I began experimenting and shooting with one hand using the neck index technique, but I hated what I was seeing (or not seeing) when I shot. With the gun indexed along my neck, the sights were receiving no direct illumination and the target was shadowed due to the way the light was shining on the back of my hand (see the photo). I modified the technique by sliding the gun up my face until the light began to illuminate both my sights and the target, which happened to be in line with my eye. Hence the new technique was born and called the “eye index” technique.

Key factors in the successful employment of this technique include:

  • Grip the flashlight with the thumb on the activation button deep enough in the hand to leave the index finger free to facilitate gun or magazine manipulation.
  • Flashlight index the gun on the head, no lower than the eye. When done correctly, the sight and target should both be illuminated.
  • Once you find the right index point and wrist angle, learn what it feels like so you can reindex that point quickly if needed for an engagement. Keep the wrist angle the same once you perfect it, as varying the angle will change where the beam hits the target.
  • Illuminate by depressing the thumb button on the light, using temporary on to engage, scan and assess. The flashlight need not be indexed to the head when searching, but I recommend keeping it high in case you need to defend your head from a blow.

Try the eye index technique next time you train. I think you will find it useful and simple to learn.

 

Read More…

 

 

Bookmark the permalink.

Comments are closed.